Replacement 10-15V Red/Grey/Blue Voltmeter for Schaudt

Replacement meter commonly found in Schaudt Electroblok / EBL / Control panel water / volt meters for IT type Control Panels. If your meter is not working properly or the backlight comes on but the needle does not move for waste or voltage then this is the item you need. These meters are Red/Grey/Blue with a Blue background - if you require Red/Green/Blue with a Black background then see our other listing here.

These meters are simple to fit but does require soldering. Simply unsolder the 4 joints on the old meter, unbolt from the front panel, refit the new panel and solder the wires back on. Please feel free to contact us if you need any further advice on doing this.

Note: If you have an older panel with a volt meter that starts at 6V then this meter is not a direct replacement. If you have one of these meters then you need the alternative type of meter<HERE>.