Burner Control Device Tester

The Apuljack BCD Tester allows the Burner Control Device (BCD often refered to as the 'Sparker') to perform a normal gas start on the fridge.  If a fridge does not work on GAS then this could be due to either the main PCB or the BCD but it is impossible to tell.

This tester is completely independant from the other electronics of the fridge and can be used to run the BCD seperately and hence test that it functions.  This tester is entirely powered from your mobile phone (or a power bank) via USB. This allows easy diagnostics of the BCD without the reliance of any 12V or fridge circuits!  In fact you can run the whole fridge on gas without ANY electrics in the entire vehicle!

The device is easy to use, simply unplug the 3 way BCD loom (Violet, White and Black wires) from the main PCB and plug it on the BCD tester.  Then plug it into your phone/power pack.  The tester has a power LED to show that it is being powered.  There are then 2 other LED's - the first IGNITION/RUN lights when the BCD is either sparking or lit.  If the BCD does not manage to light the gas then the 2nd red LED will light.

Supplied complete with 300mm USB cable. Note: Your phone will need a USB C and support OTG (almost all USB C devices support OTG).