Override Emergency Start Connector For Alde 3010/3020

This handy small connector allows you to still run your Alde boiler if your control panel fails. A perfect piece of kit to keep in the draw in case of emergencies. This is functionally identical to Alde Part number 3010-218. If you want to use this with a 3020 boiler then you will also need the Adaptor Cable - Part Number 3020-035.


The procedure to use this connector is as follows:-

1. Disconnect the 12V cable and the cable to the control panel on the boiler.

2. Connect the Emergency Start connector to where the control panel was connected on the boiler main board.

3. Reconnect 12V to the boiler


Now the boiler starts with gas and 1kW. Adjustment of the room temperature is not possible. Constant pump operation is set.